NBC – Belt Driven Roller Conveyor
Two-in-one conveyor lowers the cost of ownership
MHS Conveyor Narrow Belt Conveyor is a belt-driven live-roller conveyor that can be configured into zero-pressure contact accumulation and transportation conveyor using all the same frame and drive components. This versatility results in equipment, installation, and overall cost-of-ownership savings.
While offering excellent cost savings, NBC also incorporates high-value features as standard. The logic modules are easily set in the field for basic or progressive (train) release. The direct-drive belt is powered with a 97% efficient gear motor that reduces energy consumption. NBC utilizes CRUZ® frame with the rollers low and built-in guardrail configuration for all accumulation conveyor. A rollers-high version is used for all transportation style conveyors.
Technical Data
> Max. Product Weight: 50 lbs/ft or 75 lbs/product
> Min. Product Length: 6″ on 2″ roller centers
> Standard Widths: 16″, 22″, 28″, 34″ between frames
> Zone Lengths: Contact accumulation: 48″
> Speed Range: 70 fpm to 250 fpm
Features |
Benefits |
| One drive powers a line made up of any combination of zero-pressure contact accumulation and transportation conveyor | Reduces wiring, installation costs and time, reduces number of drives required, increases layout flexibility |
| All butt-plate connectors | Ceiling supports may be placed at any location between bed joints, superior strength and rigidity |
| The 500-AT has an air take-up with a maximum belt take-up of 55″, a maximum belt pull of 500 lbs. and is used for lengths from 12′ up to 220′. | Allows greatest efficiency and lowest cost for the customer’s application |
| Improved hot-meld belt splice. | Superior belt strength, long belt life, eliminates cold splicing |
| Photo sensor is easily adjustable from the top | Fast, simple adjustment, eliminates need for visual alignment from opposite side of conveyor |
| One logic module handles both basic and progressive logic and the accumulation mode is changed with the press of a button | No more swapping out modules to change the logic, time savings, cost savings |
You must be logged in to post a comment.