Lineshaft

XR40 & XP43CZ

True non-contact accumulation conveying products without damage

TGW System’s XenoPRESSURE XP43CZ provides true non-contact accumulation and features photo electronic sensors and a pre-wired control system. Zero-pressure zones guarantee that products will not touch one another during accumulation. This is extremely important where fragile products require protection from damage. In addition, one product per zone allows singulated release. The unique line-shaft design utilizes a quiet pressure pad assembly. Upon a signal from the zone sensor, a XenoBRAKE assembly raises against the underside of the carrying rollers, quietly and efficiently stopping and locking their rotation. This stops the product in that zone. CRUZcontrol is MHS Conveyor patented electronic sensing design, featuring integral photoeye, solenoid valve and control module all pre-assembled at our factory. The local control logic is built-in, not added at installation, greatly reducing field wiring and implementation time and expense.

Technical Data

  • Max. Product Weight: 50 lbs/ft or 75 lbs/product
  • Min. Product Length: 9 on 3 roller centers
  • Standard Widths: 16, 22, 28, & 34 between frames
  • Zone Lengths: 18, 24, 30, & 36
  • Speed Range: 30 to 120 fpm
  • Operating Air Pressure: 40 PSI

Features

Benefits

Non-contact zero-pressure accumulation Protection of fragile products from impact
CRUZcontrol electronic sensing No minimum weight restriction
Cushioned pneumatic actuation Quiet operation and increased component life
Factory pre-wired and tested control logic Easy, fast installation reduces cost
Preset CRUZcontrol logic Eliminates field programming to cut costs
Five year, 10,000 hour warranty Peace of mind
Basic or progressive zone release Product release rate matching application
24 volt CRUZcontrol Reduced wiring cost
Preset CRUZcontrol logic Eliminates field programming to cut costs
Five year, 10,000 hour warranty Peace of mind
Basic or progressive zone release Product release rate matching application
24 volt CRUZcontrol Reduced wiring cost

Versatile, reliable and quiet line-shaft-driven live roller conveyor

All XenoROL conveyors are economical to install and maintain because of their efficient drive design. The more complex the configuration of conveyors, transfers, and devices, the fewer drives are required in comparison to other types of material handling systems. Universal joint connections allow curved sections, spurs, and transfers to be slave-driven without the need for additional motors. XenoROL conveyor rollers are independently driven by pre-tensioned elastometric belts, which pull the drive spools against the lineshaft. The clutch-like slippage of the spool permits accumulation without damaging products or components. MHS Conveyor lineshaft conveyors and accessories are easily reconfigured to meet your current demands and future challenges. XenoROL systems are quieter than conventional conveyors due to the need for fewer drives and moving parts. MHS Conveyor five years or 10,000 hours warranty on all lineshaft-specific components is the most comprehensive in the industry.

Technical Data

  • Max. Product Weight: 50 lbs/ft or 75 lbs/product
  • Min. Product Length: 9"
  • Standard Widths: 13", 16", 22", 28", 34", 40" between frames
  • Drives: Up to 2 HP
  • Transfers (Urethane Belt): 3 standard styles
  • Application Criteria: Full range of accessories

Features

Benefits

Fewer drives and moving parts Best value, quiet operation, energy efficient
High drive belts on curves, spurs and merges Increased drive performance
Five year - 10,000 hour warranty Peace of mind
Modular design Easy to reconfigure the system
Drive spool slippage Safe operation, reliable accumulation
Fewer motors required Reduced operation, electrical and wiring costs
Add transfers, merges and curves without additional drives Versatility, low cost, best value
Mix and match transportation and accumulation sections Fewer motors / lower cost